Explore Kwik-Wall Solutions

New from our innovative engineering group, Kwik-Span™ is the perfect solution for high cost and long lead times that typically accompany structural support requirements for Operable Partition installations involving structural engineers, steel fabricators, steel support erectors – most of whom are not familiar with the unique nature of partition support requirements.

Single-source your operable wall support  from Kwik-Wall along with your new operable wall, Kwik-Span saves time and money by eliminating the superfluous cost and project management overhead associated with multiple involved parties, including structural engineering firms, steel beam suppliers and fabricators, and cranes and crane operators.  

Kwik-Wall has pre-engineered Kwik-Span independent support to  carry the exact load of your Kwik-Wall partition system, eliminating a significant percentage of the total cost, effort and risk associated with the typical support design, fabriction and install process. Kwik-Wall certified distributors furnish and install the complete support system into your project with the minimum lead time. Perfect for retrofit tenant improvement projects, as well as for new building construction.

  • Reduce your project’s timeline! Perfect for quick-turn TI projects or in retrofit situations where the existing structure isn’t capable of supporting the operable wall.  
  • Reduce your overall cost by eliminating the number of steps and involved parties and subcontractors.
  • Pre-engineered to your exact operable wall support requirements.
  • Designed for anticipated deflection with engineered-in camber.  
  • Partition weight is transferred to floor by support post connections at each end.
  • Minimal sway brace connections to existing structure above for lateral stability only.
  • Kwik-Span can be fully recessed into the ceiling plenum, partially recessed or installed below ceiling with side truss panels matching  the operable wall finish material.  
  • Kwik-Span’s structural aluminum posts can be installed against finished opening walls,  recessed into post pockets or installed behind the finish sheet rock.
  • Sized in components that will fit in most construction elevators, Kwik-Span eliminates the need for cranes to lift steel beams into your building and glazers to remove and reinstall exterior windows for access. 

     

Talk to your local authorized Kwik-Wall distributor and find out just how much time and money you can save on your project, with Kwik-Span self support system!

Kwik-Guide: Kwik-Span™ Support System

SPECIFICATIONS

KWIK-SPAN™425

KWIK-SPAN™ 850

KWIK-SPAN™ 850 HD

TRUSS DEPTH

 Varies by partition & opening weight @ 24"-48" truss depth

 Varies by partition & opening weight @ 24"-48" truss depth

 Varies by partition & opening weight @ 24"-48" truss depth

TRUSS MATERIAL

Steel, Aluminum Extrusion

Steel, Aluminum Extrusion

Steel, Aluminum Extrusion

MAX. SPAN WIDTH

Based on Partition Weight and STC

Based on Partition Weight and STC

Based on Partition Weight and STC

TRUSS FINISH (visible)

Clear Anodized Aluminum

Clear Anodized Aluminum

Clear Anodized Aluminum

SIDE PANELS (partial/full below ceiling mount)

1/2" MDF Substrate, Matching the Operable wall finish

1/2" MDF Substrate, Matching the Operable wall finish

1/2" MDF Substrate, Matching the Operable wall finish

TRACK SYSTEMS

6063-T6 Clear Anodized Aluminum

6063-T6 Clear Anodized Aluminum

6063-T6 Clear Anodized Aluminum

POSTS

6063-T6 Clear Anodized Aluminum

6063-T6 Clear Anodized Aluminum

6063-T6 Clear Anodized Aluminum

KW_logo_Fin3

If you do not recieve an email,
please check your junk mail folder.